Qubino Flush on/off Thermostat

The Qubino Flush On/Off thermostat is ideal for directly controlling electric or water-based underfloor heating systems, electric water heaters, hot water pumps, electric radiators and similar. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.

Power supply 110 – 230 VAC ± 10%
50 / 60 Hz, (24–30 VDC)
Rated load current of AC output (resistive load)* 1 X 10 A / 230 VAC
Rated load current of DC output (resistive load) 1 X 10 A / 30 VDC
Output circuit power of AC output (resistive load) 2300 W (230 VAC)
Output circuit power of DC output (resistive load) 240 W (24 VDC)
Power measurement accuracy P = 5 – 50 W, +/- 3 W
P > 50 W, +/-3%
Digital temperature sensor range -50° ~ +125°C, resolution 0.1°C
Digital temperature sensor cable length 1000 mm
Operation temperature -10° ~ +40°C
Distance up to 30 m indoors
(depending on building materials)
Dimensions (WxHxD) 41.8 x 36.8 x 15.4 mm
(packaging) (115 x 96 x 22)
Weight (including packaging) 48 g (64 g)
Electricity consumption 0.4 W
For installation in boxes Ø ≥ 60 mm or 2 M
Switching Relay

Supported Z-Wave Frequencies

ORDERING CODE FREQUENCY
ZMNHID1 868.42 MHz
ZMNHID2 921.42 MHz
ZMNHID3 908.42 MHz
ZMNHID4 869 MHz
ZMNHID5 916 MHz
ZMNHID8 865.2 MHz