Qubino Flush 1 Relay

The Qubino Flush 1 Relay is ideal as an electrical device switch for lights, fans, ovens, washing machines, irons, power sockets, garage doors, electric radiators, water heaters, etc. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.

Power supply 110 – 230 VAC ±10%
50/60Hz, (24-30 VDC)
Rated load current of AC output (resistive load)* 1 X 10A / 230 VAC
Rated load current of DC output (resistive load) 1 X 10A / 30 VDC
Output circuit power of AC output (resistive load) 2300 W (230 VAC)
Output circuit power of DC output (resistive load) 240 W (24 VDC)
Power measurement accuracy P = 5–50 W, +/-3 W
P > 50 W, +/-3%
Digital temperature sensor range
(sensor must be ordered separately)
-50° ~ +125°C
Operation temperature -10° ~ +40°C
Distance up to 30 m indoors
Dimensions (WxHxD) 41.8 x 36.8 x 15.4 mm
(packaging) (79x52x22 mm)
Weight (including packaging) 28 g (34 g)
Electricity consumption 0.4 W
For installation in boxes Ø ≥ 60 mm or 2M, depth ≥ 60 mm
Switching Relay

* In the case of loads other than resistive, pay attention to the value of cosφ and if necessary use a load lower than the rated load. Max current for cosφ = 0.4 is 3 A at 250 VAC, 3 A at 24 VDC L/R = 7 ms.

Supported Z-Wave Frequencies

ORDERING CODE FREQUENCY
ZMNHAD1 868.42 MHz
ZMNHAD2 921.42 MHz
ZMNHAD3 908.42 MHz
ZMNHAD4 869 MHz
ZMNHAD5 916 MHz
ZMNHAD8 865.2 MHz